Coleman MACH Room Temperature Sensor for Zone Control Thermostat
|Series||Coleman MACH Zone Control|
|Compatible With||Coleman MACH 8xxx Series and 9xxx Series Zone Control Thermostats.|
|Dimensions||Sensor: 1-3/8" x 3/4" x 3/8"
Wire Lead: Approximately 11" Long
|Warranty||Limited 90 Day Warranty|
|Special Order Item||No|
|Return Policy||30 Days (After Delivery)|
Thermostat and Room Temperature Sensor Location Information from Coleman MACH:
This system is designed to work one of two ways. A built-in temperature sensor on the thermostat can control zone 1. In this case the thermostat must be located in zone 1. On the other hand, a remote temperature sensor can be connected to zone 1. This situation would allow the thermostat to be located virtually anywhere in the coach as long as the user can get to it to operate it. Every zone other than zone 1 must always have a remote temperature sensor to control the system.
This thermostat is a sensitive instrument. For accurate temperature control and comfort, the following considerations should be taken into account when locating both remote sensors and the thermostat if the thermostat is to be used as the zone 1 temperature sensor.
1. Locate on an inside wall about five feet above the floor. Pick a dry area where air circulation is good, but not in line with exterior doors.
2. Do not install where there are unusual heating conditions; Such as direct sunlight, heat producing appliances (television, radio, wall lamps, etc.) or a furnace/air conditioner supply air register.
*This item you are viewing is only the temperature sensor, the thermostat and control boxes are sold separately. Please see our Related Products below.*