WFCO 65 Amp Converter/Charger
The WF-9800 Series converter/chargers are versatile, advanced power source solutions.
||105-130 Vac, 60 Hz, 1260 W
||Converter Type: Three-Stage Converter Charger
Voltage Output: 13.2 – 14.4V DC Range
Absorption Mode (Nominal Voltage): 13.6V DC (nominal voltage)
Bulk Mode (Quick Charging Voltage): 14.4V DC (quick charging voltage)
Float Mode (Trickle Charge Voltage): 13.2V DC (trickle charge voltage)
Over Current : Yes
Over Temperature: Yes
Over Voltage : Yes
Reverse Polarity: Yes
Short Circuit: Yes
Cooling System: Yes
Certifications : FCC
All models are UL and cUL-Listed and FCC Class B compliant
||NOTE: This converters power cord is 20A and will require the use of 20A outlet backed by a 20A breaker.
||6.3˝ wide; 3.9˝ high; 10.3˝ deep
|Special Order Item
WARNING: This product can expose you to chemicals, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov
The WF-9865 model provides 65 amps of clean, reliable DC power, which is ideal for powering electronics and appliances. The 9800 Series provides clean power, even without filtering from a battery. Quiet operation is assured as the cooling fan runs only when needed.
Another advantage is FCC Class B compliance for the WF-9865 model, which means that the converter does not cause interference with televisions, radios or other signals. Automatic three-stage battery charging maintains your battery’s life with three nominal voltage output modes: 13.2V DC “float” mode, 13.6V DC “absorption” mode, and a 14.4V DC “bulk” charge mode. Electronic current limiting automatically shuts down the power during overload or short-circuit conditions.
NOTE: 20 amp AC receptacle required