0 Items
Total: $0.00
WARNING: This product can expose you to chemicals, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
PullRite MOR / Ryde Capture Plate for SuperGlide Hitches Description
All SuperGlide hitches will require the installation of a capture plate in order for the hitch to function, either the QuickConnect capture plate as described above, or in installations where a QuickConnect Plate may not be available, a Universal Capture Plate may be used.
The use of the new QuickConnect Capture Plates will simplify the installation and significantly reduce the time involved in the installation. The new QuickConnect Capture Plate simply slips up over the king pin; set screws secure it to the king pin box. When the trailer is hooked up to the hitch, the QuickConnect Capture Plate will function and allow the trailer to guide the SuperGlide hitch to move when turns are being made.
*If King Pin model and measurement "A" don't match up, use measurement "A" for selection*
✓ SAE J2638 Testing: Passed and Exceeded
The use of the new QuickConnect Capture Plates will simplify the installation and significantly reduce the time involved in the installation. The new QuickConnect Capture Plate simply slips up over the king pin; set screws secure it to the king pin box. When the trailer is hooked up to the hitch, the QuickConnect Capture Plate will function and allow the trailer to guide the SuperGlide hitch to move when turns are being made.
*If King Pin model and measurement "A" don't match up, use measurement "A" for selection*
✓ SAE J2638 Testing: Passed and Exceeded
Useful Downloads
PullRite MOR / Ryde Capture Plate for SuperGlide Hitches Additional Information
| Item # | 61782 |
|---|---|
| Brand | PullRite |
| Series | Quick Connect / SuperGlide |
| Model | 331707 |
| King Pin Manufacturer | MOR / Ryde |
| Fits | Rubber Cushion MOR / Ryde King Pin Models |
| Features | *Most MOR / Ryde King Pins require this custom capture plate, universal may NOT work* ✓ SAE J2638 Testing: Passed and Exceeded |
| Dimensions | See Diagram (Picture 2) - Measurement A: 13-1/2" Measurement B: 5-3/4" Measurement C: 14-5/8" |
| Made in | USA |
| Special Order Item | No |
| LTL Freight | No |
Customers Who Bought This Also Bought
-
PullRite Industry Standard 18K SuperGlide 5th Wheel HitchPrice: $1,144.98 -
Bargman 7-Way Right Angle 5th Wheel Wiring HarnessPrice: $90.99 -
PullRite Industry Standard 16K SuperGlide 5th Wheel HitchPrice: $959.00
Need Help? Chat Live
Flat Rate Shipping
9.98 Shipping
On Most Orders
Bill Me Later!
Product Reviews
Result filter:
- Date - Newest First
- Date - Newest First
- Date - Latest First
- Highest Rated
- Lowest Rated
- Most Helpful
- Ownership
Wea
14/09/14
05:33 pm (GMT)
Excellent product, just a little pricey
A very good product, works great made my short bed a perfect choice, it is a little expensive but the only way to go with a short bed truck. Defiantly would recommend it.
)
Bill
13/05/14
01:15 pm (GMT)
Capture Plate is well built
Though I have not yet pulled with the new capture plate, it appears to be of very high quality. I would definitely do business with Dyer’s again. Everything shipped on schedule with no issues and the support leading up to the purchase was top notch.
)
Shem
24/05/13
12:49 am (GMT)
Excellent Service
Good product. Fast service
)
doug
17/11/12
12:36 am (GMT)
great price and fit
i installed my plate for my mor ride hitch today and picked up my new montana big sky fifth wheel. everything went perfect and we made it home about 1/2 hour ago. thanks for sending the right capture plate the first time and i installed with no problems except as usual the instructions were not very good.
)
Greg
13/08/11
08:17 pm (GMT)
See below
Hello,
I just now am able to pull my trailer due to Pull Right/Dyers RV sending a capture plate that did not fit my hitch pin. They argued at first that it had to be the right size and that my hitch pin was incorrect. However, after investigating, they found that the hitch plate they sent, as well as all others they manufactured were incorrect. I had to buy one from the people that make my Mor Ryde hitch.
I love the PullRite hitch and the Super Rails so far.
Thanks,
Greg
**Dyer's Note - After being notified by the customer that there was an issue with the capture plate, the full plate amount plus shipping was refunded to the customer with no questions asked. The arguing mentioned in the review took place between the customer and PullRite while determining if it was defective, Dyer's refunded the money and made things right with the customer immediately after being notified of this issue.**
I just now am able to pull my trailer due to Pull Right/Dyers RV sending a capture plate that did not fit my hitch pin. They argued at first that it had to be the right size and that my hitch pin was incorrect. However, after investigating, they found that the hitch plate they sent, as well as all others they manufactured were incorrect. I had to buy one from the people that make my Mor Ryde hitch.
I love the PullRite hitch and the Super Rails so far.
Thanks,
Greg
**Dyer's Note - After being notified by the customer that there was an issue with the capture plate, the full plate amount plus shipping was refunded to the customer with no questions asked. The arguing mentioned in the review took place between the customer and PullRite while determining if it was defective, Dyer's refunded the money and made things right with the customer immediately after being notified of this issue.**
)
