Dicor Dove Bright White Self Leveling Lap Sealant

$11.01
5+ In Stock
Item #
31548
EPDM Lap Sealant creates a secure, secondary seal along the roof’s edges, air vents, vent pipes and screw heads.
More Information
Item # 31548
Brand Dicor
Model 501LSD-1
Fits Compatible With EPDM (Ethylene Propylene Diene Monomer)/ Dicor Diflex II And Britek TPO (Thermoplastic Olefin) Roofing
Features Color: Dove Bright White
Formulated for 1/4" and 3/8" bead.
Self-Leveling (for horizontal surfaces).
Included (1) 10.3 oz. tube
Made in USA
Net Weight 0.90
Special Order Item No
UPC 677917000364
LTL Freight No
Frequently Bought Together
Total price
Compatible with EPDM and TPO sheeting, it adheres firmly to aluminum, mortar, wood, vinyl, galvanized metal, fiberglass and concrete. Ideally suited for aftermarket use, the lap sealant is one of the highest volume products sold in RV stores today.

Color matched (see specs for colors), the EPDM lap sealant is UV stabilized to prevent deterioration and discoloration. Plus, it will not stain or discolor any roofing material to which it is applied.

Directions for Use:
Clean surface of all dirt, loose paint, rust, oil and grease. Allow surface to dry before applying sealant. Use standard caulking equipment to apply sealant. In cold weather, warm container at room temperature before use.

Caution:
Keep away from heat, sparks and flame. To avoid breathing vapors, open windows and doors or use other means to insure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH/MSHA TC23C or equivalent) or leave area. Causes nose, throat, eye and skin irritation.

Spills:
Keep container closed when not in use. In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations.

In Case of Fire:
Use water spray, foam, dry chemical or carbon dioxide. Do not use a solid stream of water because it can scatter and spread the fire. Vapors are heavier than air and may travel along the ground to distant ignition sources and flash back.

First Aid:
If swallowed, do not induce vomiting. Call a physician immediately. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Glasses or goggles are recommended. In case of eye contact, immediately flush eyes with plenty of water of at least 15 minutes. Chemically resistant gloves recommended. In case of skin contact, thoroughly wash affected area with soap and water.

Health Notice:
Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful and fatal.

677917000296
No reviews yet ... Have an opinion? Help others decide. Share your knowledge about this product by submitting a review.
    MSDS Sheet (243.64 kB)
    What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.