Flat rate shipping
$9.98 ground shipping
Dicor 3/4" Butyl Seal Tape 30' Roll
$11.34
5+ In Stock
Item #
30912
This butyl tape is ideal for sealing uniquely shaped joints. Installs quickly, without gaps. Apply along unusual patterns. Because the sealant is on a continuous roll, installer can work fast and be virtually assured that there are no skips or runs in the seal.
| Item # | 30912 |
|---|---|
| Brand | Dicor |
| Model | BT-1834-1 |
| Width | 3/4" |
| Thickness | 1/8" |
| Length | 30' |
| Color | Gray |
| Special Order Item | No |
| UPC | 677917001309 |
| LTL Freight | No |
Frequently Bought Together
-
$11.34 -
$42.65 -
$12.89 -
$56.74 -
$12.13
Total price
Installation:
- Surfaces must be clean and free of moisture and contamination.
- Clean, remove dust, dirt, moisture oil and grease.
- Cut to desired length then peel off the release liner. DO NOT Stretch this product.
- Apply to seam, joint, opening, skylight frame, etc. Install or assemble as required. Use Mineral Spirits to clean up this product.
- Do not apply this product in weather-exposed areas, where temperatures will exceed 190°F.
- Do not stretch this product during application.
- Keep out of the reach of children.
- Do not use where acidic or alkaline chemicals are present.
- For industrial, professional use only.
Technical Specs:
Appearance: Grey, extruded butyl sealant tape.
Temperatures: Application: 30°F - 110° F Operating limits: -20°F - 275° F.
Low Temperature Flexibility: No cracking, no adhesion loss at -20°F.
Tensil Strength: 25psi (ASTM D987-72) with 200 ‰ elongation (HTM 15.0).
Needle Penetration: 80 - 105 (ASTM D 217) (100GM WT @ 77° F).
Release Liner: Clearly released with no transfer of product compound (ASTM C879).
Water Resistance: Sealant maintains adhesion to galvanized metal after being submerged for 30 days at 120° F (HTM 9.0).
Chemical Resistance: Excellent to water, vapor and alcohol. Weaken to acids and bases. Avoid use with organic solvents.
Corrosivity: No staining, etching or other signs of corrosion on galvanized or coated metals (ASTM D3310).
Flammability: Nonflammable.
Shelf Life:18 months - 2 years
Storage Temperature: 30° F - 110·° F
Pressure Class: SMACNA 1/2, 1, 2, 3, 4, 6 and 10 in w.g.
Specifications: Military MIL-C-18969B, Type II, Class B. Federal TT-C789A, Type II, Class B.
- Surfaces must be clean and free of moisture and contamination.
- Clean, remove dust, dirt, moisture oil and grease.
- Cut to desired length then peel off the release liner. DO NOT Stretch this product.
- Apply to seam, joint, opening, skylight frame, etc. Install or assemble as required. Use Mineral Spirits to clean up this product.
- Do not apply this product in weather-exposed areas, where temperatures will exceed 190°F.
- Do not stretch this product during application.
- Keep out of the reach of children.
- Do not use where acidic or alkaline chemicals are present.
- For industrial, professional use only.
Technical Specs:
Appearance: Grey, extruded butyl sealant tape.
Temperatures: Application: 30°F - 110° F Operating limits: -20°F - 275° F.
Low Temperature Flexibility: No cracking, no adhesion loss at -20°F.
Tensil Strength: 25psi (ASTM D987-72) with 200 ‰ elongation (HTM 15.0).
Needle Penetration: 80 - 105 (ASTM D 217) (100GM WT @ 77° F).
Release Liner: Clearly released with no transfer of product compound (ASTM C879).
Water Resistance: Sealant maintains adhesion to galvanized metal after being submerged for 30 days at 120° F (HTM 9.0).
Chemical Resistance: Excellent to water, vapor and alcohol. Weaken to acids and bases. Avoid use with organic solvents.
Corrosivity: No staining, etching or other signs of corrosion on galvanized or coated metals (ASTM D3310).
Flammability: Nonflammable.
Shelf Life:18 months - 2 years
Storage Temperature: 30° F - 110·° F
Pressure Class: SMACNA 1/2, 1, 2, 3, 4, 6 and 10 in w.g.
Specifications: Military MIL-C-18969B, Type II, Class B. Federal TT-C789A, Type II, Class B.
Write Your Own Review
