PullRite Trailair Tri-Glide Capture Plate for SuperGlide Hitches

Capture plate for SuperGlide Hitches that is compatible with Trailair Tri-Glide King Pins.
Item # 72202
Color Black
Special Order Item No
Ships LTL Freight No
Return Policy 30 Days (After Delivery)
5+ In Stock

Description / PullRite Trailair Tri-Glide Capture Plate for SuperGlide Hitches

All SuperGlide hitches will require the installation of a capture plate in order for the hitch to function, either the QuickConnect capture plate as described above, or in installations where a QuickConnect Plate may not be available, a Universal Capture Plate may be used.

The use of the new QuickConnect Capture Plates will simplify the installation and significantly reduce the time involved in the installation. The new QuickConnect Capture Plate simply slips up over the king pin; set screws secure it to the king pin box. When the trailer is hooked up to the hitch, the QuickConnect Capture Plate will function and allow the trailer to guide the SuperGlide hitch to move when turns are being made.

*If King Pin model and measurement "A" don't match up, use measurement "A" for selection*

✓ SAE J2638 Testing: Passed and Exceeded

More Information

Item # 72202
Brand PullRite
Series Quick Connect / SuperGlide
Model 331757
King Pin Manufacturer Trailair
Fits Trailair Tri-Glide Only
Color Black
Features ✓ SAE J2638 Testing: Passed and Exceeded
Dimensions See Diagram (Picture 2)
Measurement A: 12-3/4"
Measurement B: 5-15/16"
Measurement C: ALL
Made in USA
Special Order Item No
Return Policy 30 Days (After Delivery)
UPC 816456010902
LTL Freight No

Product Attachments

Customer Reviews

Price
Value
Quality
bad product
Review by Salvation
I agreed 100% with the review regarding tolerences and loosness of the adapter plate versus receiver they move or get loose and creates a clunk loud noice while towing. Really for an expensive product I think this is BAD design.
Price
Value
Quality
BEWARE! Plate doesn't fit properly - damages and hits pin box
Review by RVKitMan
I purchased this item and installed it. But it doesnt fit right and hits in four locations. I contacted Pullrite (Mfg) and they gave me the run around, arguing that they have sold thousands of these with no complaints. So I customized mine by cutting of metal were contact occurred. I continued to phone Pullrite and sent them photos. They finally admitted they had confirmed hard contact and said engineering was working on a fix. Five weeks and six hours of my time later they sent a new revised plate. I have had many problems with this company. Their "tech" support is argumentative and dismisses everything as Customer Error. I also have a Pullrite Super Glide 18K truck bed hitch which has a number of problems. The receiver plate assembly is loose (sloppy) and causes a loud clunk while driving. They have refused to replace it but acknowledge that the manufacturing tolerances are wide and fore-aft movement is possible. These products are NOT cheap and this Mfg doesn't stand behind their products. Recommend you buy a different brand.

2 Item(s)

per page
Write Your Own Review
You're reviewing: PullRite Trailair Tri-Glide Capture Plate for SuperGlide Hitches
Your Rating:
Loading...

You submitted your review for moderation.

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

WARNING: This product can expose you to chemicals, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.