Use in Dometic 3850712-xxx, Choose according to Dometic Board number.
Refrigerator 2-way & 3-way control board: Model Micro P-711.
Use the Micro P-711 to replace all "Black Box" boards beginning with part # 293XXXX
Dometic 3850712-xxx Black Box Board / 3850712.01
*The Dinosaur 3850712.01 is designed to replace Dometic's® part number 3850712-xxx. Do not attempt to replace any other Black Box Board part number with this board.
Built in Ignitor.
2-way or 3-way operation.
Automatic System Detection
Food Saver features
Improved Thermocouple Circuit
Variable Temperature adjustment for those FIXED TEMP refrigerators.
(1) Box & Control Board
(1) Instruction & Information sheet
(1) 3-Way Fuse
The check light comes on after each ignition try fails to sense a flame. Repeats the 3-try ignition cycle at 30 minute intervals if no flame is sensed. In 3-way models, the DC element will drop out and the DC mode light will flash if the voltage level falls too low for more than 10 seconds.
Note: The Mirco P-711 will not work to replace the 3850415-013 board found in Universal Power Board kits # 3308741.002 (2-way) and # 3308742.000 (3-way). These kits change the gas valve wiring and DC element wiring
(in 3-way refrigerators only). Our 3850415.01 board will work to replace the board in both 2-way and 3-way kit.
*Warning: The Micro P-711 CANNOT replace any Black Box Board part number that starts with "385"! You must identify the part number of the physical board that is actually in your refrigerator now! Failure to do so can result in getting the wrong
board! Please look on the black cover or under the black cover for a part number that begins with "385 or "293".