Fabric: 12 oz vinyl
Slideout Awning Fabric
A Sleek, modern, unified look.
Cut To Fit
Polycord is pre-installed for installation at the awning rail and awning roller.
Resists rips, tears and fraying
Measure, mark and cut with a utility knife. Clip polycords with diagonal cutters.
Maximum extension is 47 inches.
Re-use your existing hardware. Universal for Carefree awning, A&E by Dometic awning, Lippert Solera awning. Measure, mark and cut with a utility knife. Clip polycords with diagonal cutters.
In some cases, your vinyl awning fabric will shrink over time due to copious amounts of sun and heat exposure. To cut the correct size for your new replacement vinyl fabric, please measure the tube your fabric rolls up on (the awning roller tube/roll bar) and subtract 2" from that total measurement. By subtracting 2" from your roller tube measurement, this allows a 1" gap on each side of the fabric when installed so that your fabric can roll back up without the fear of it rubbing or snagging on the roller tube end caps.
You can also measure your existing awning fabric if you would like your replacement fabric to be the same size as your current fabric, but please keep in mind that there must be a gap on each side of the roller tube between your fabric and the end caps to prevent any damage to the awning fabric when extending or retracting. Measure, mark and cut with a utility knife or scissors. Clip polycords with diagonal cutters.