Awning Pro Tech - RV Polymer Awning Cover Protection System

Protect your awning from the sun and other damaging weather with this new awning protection system.
Item # 71869
Color White
Special Order Item Yes
Ships LTL Freight No
ONLY 2 LEFT!

Description / Awning Pro Tech - RV Polymer Awning Cover Protection System

Awning Pro-Tech is a UV resistant product that protects your RV's fabric awning cover from the damaging effects of the sun and weather. Did you know that the average replacement cost for a fabric awning is $275.00 on up, not including labor, and most are not covered by warranty? Fading takes place within a few months and degradation can happen in one to two years. Protect your investment! Installs fast and easily, no tools required. Stain resistant, easy to clean.

-Edges may be sharp; be careful when handling parts.
-Use care; fingers can get pinched between parts during installation.
-Do not transport RV with Awning Pro-Tech installed.
-Do not install Awning Pro-Tech on wet awning fabric because it may cause molding.
-Let the fabric dry before installing.

Two pieces with a 2" lap will fit an 8' awning, three pieces with a 2" lap will fit a 12' awning and so on. If your awning is longer than 20' please contact Awning Pro-Tech LLC. to order additional pieces.

More Information

Item # 71869
Brand Awning Pro-Tech
Model 5743UV-A20
Replaces 5743UV
Fits Awnings from 4' - 20' & 3.65" - 4.25 Dia.
Color White
Features Installs fast and easily, no tools required.
Flexible Enough For Easy Installation
Installation In Minutes, Just Snaps On
Stain resistant.
Easy to clean.
Snaps together for easy storage.
Material: UV Resistant Polymer
Mounting Type: Snap-On
Compatibility: Patio Awnings
Included (5) Polymer Cover Pieces
(2) Transport Clips
Dimensions 20 Foot Total Length
5 Pieces Of 4 Foot 2 Inch Length x 3.85 Inch Diameter
Warranty 15 Years
Special Order Item Yes
UPC 799928280419
LTL Freight No

Customer Reviews

Quality
Price
Value
high cost, some flaws..
Review by pfflyer
the cost is very high,all !! edges should be deburred, NO sharp edges !!! they cut vinyl surfaces !! as well as fingers!! a lip/hood needs to be fabricated into each piece to cover the attachment point of the vinyl to the RV.. NO exposed vinyl !!! nice try!! but your product falls short of being well thought out, simply cutting a 4 inch piece of piping and selling it as a product designed as a awning cover, isn't a fair trade!! and it certainly seems a couple of the feedback comments are contribed by some one else, other than a real consumers!! sorry, just being honest, over all it's a decent product, but!!! needs refining and re-priced to be fair... P.F.
Price
Value
Quality
Easy to install - time will tell
Review by Phil
I bought these to protect my awning from the elements and I am hoping they will work. So far I am impressed with the quality and the ease of installation. I will report back after a season to see if my expectatio0ns are met.
Price
Value
Quality
Problem solved
Review by MrTeaze
I have the answer to all the complaints on here with the leading edge being exposed ... after installing the awning protector on my RV and rotating it up as far as I could I looked and noticed my leading edge was exposed and more so in the middle where it sagged there was at least an inch plus exposed ... so after banging my head on this trying to look at product modifications I realized the Awning needed modifying, my awning sat low to the RV roof line, I then decided to raise the stops on the extension tracks to give lift to the aning and raised it 1-2 inches now the leading edge sits lower allowing the awning cover to roll further around the top solving the exposed edge ... I hope this helps
Price
Value
Quality
I can't believe how many cheapos took the time to comment negativly
Review by Ken
I think its a great product. everyone is complaining that it doesn't cover the top bead. Try installing it with the top edge inside the gutter. solves the problem. The product solves a big problem and I am happy with it. As for those who are too cheap to understand Cost = benefit . . . go ahead try to make it yourself! while your awning fabric is rotting away. I really do not think it can be improved on and it is well worth the investment!
Quality
Price
Value
Great product
Review by Turk
I have replaced my awning because of sun rot, I bought this for my new awning to protect it. So far it works great!
Quality
Price
Value
I like this product.
Review by PTLG
I just finished installing my new Pro Tech Awning Protectors and found them very easy to install. They cover my awning right to the metal flang that attaches the awning to the RV. After I installed a section I twisted it up as far as it would go and it fit like a glove. I read the review that suggested purchasing a piece of PVC pipe and making it myself but after checking it out the PVC pipe would be way too heavy and not flexable enough to pry open to slide over the awning. I figuerd the price and doing it myself would come to around $50.00 not figuring my time and and having an inferior result. The awning arrived very promptly and I am very happy with it. I saw it mentioned in the "Good Sam Highways Magazine" question and answer section. It was just what I had been looking for and I'm glad that I went on the internet and ordered it.
Price
Value
Quality
Great product and was impressed with the swift delivery. Keep up the good work!
Review by Rangerduke
Really liked the product and performs as expected.
Price
Value
Quality
Works OK
Review by EGWILLY
This cover, as noted in other reviews, does not cover the critical part of the awning material that attaches to the awning track. It leaves about 1/2" of material and sewn seam exposed to the sun. It does cover about 95% of the material.

To resolve this , I laid a 20 foot section of 3/4 white pvc sprinkler pipe in the exposed area. This does block the sun there now.

Now I have to remember to remove it before I travel!
Price
Value
Quality
overpriced, leaves the upper few inches exposed.
Review by litefoot
I think you could buy some 4 inch pvc, cut a slit the length and make your own for about $10.
Price
Value
Quality
I think the price point should be $ 39.99
Review by Bob
The small area at the top is probably 90% of the failures and not protected

Items 1 to 10 of 20 total

per page
Write Your Own Review
You're reviewing: Awning Pro Tech - RV Polymer Awning Cover Protection System
Your Rating:
Loading...

You submitted your review for moderation.

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.